JL-CTB005N TCT Circular Saw Blade for cutting Wood, 4" to 20"
Specifications of woodworking tct band saw blade for wood:
STEEL BODY:We use high quality steel plate to ensure good
performance and to reduce the huge amount of friction.Laser cut
steel plate to remain flat and accurate for years of continuous
TIPS:Micro grain tungsten carbide tips are used to achieve the
correct cutting quality and long life characteristic.
BRAZING:Auto tip seat grinding and Auto brazing machines are set up
to get right temperature are teeth placement.The good silver
welding material requires brazing at lower temperature to avoid
dangerous results when being used.
SHARPENING:We carefully research the individual bevel tooth design
and tooth combination for each blade according to their use.Auto
sharpening phase each angle and make precise to ensure smooth
cutting face and effort-saving
4 Kinds of TCT Circular Saw Blade as follow:
|1st T.C.T. SAW BLADE FOR WOOD|
|2nd T.C.T. SAW BLADE FOR ALUMINUM|
|3rd T.C.T. SAW BLADE FOR LAMINATED PANEL|
|4th T.C.T. SAW BLADE FOR METAL|
1.Please put alloy saw vertically hang the drying rack, be sure to
avoid the damp places, do not place alloy saw on the ground or on a
shelf,keeping flat will lead alloy blade deformation.
2. Use time, do not exceed the maximum speed. Speed method of
calculation is attached for information.
3. Use time, must take protective mask, gloves, helmets,working
protection shoes, protective glasses.
4.During the installation Alloy saw, must firstly confirm the
function,use of saw table,first read the statement of saw
table.Avoid mistakes Install so as to caused the accident.
5.During the installation Alloy saw,must first check whether there
is a split distortions, and fill-ping, swaps and other phenomena
teeth on alloy saw, and then install it.
6. Super-hard and sharp ofsawtooth alloy saw,prohibit the
collision, falling ground, with taking carefully.
7.After install alloy saw blade, the saw core hole must be
confirmed whether firmly fixed in the flange of saw table saw, a
gasket must be good washer,and then gently hand to push saw
blade,confirmed the rotation Whether the eccentric shaking.
8.The cutting direction of Alloy saw arrow must be aimed at
rotation direction of saw table.Strictly no installation the
opposite direction, the mistake direction will lead out tooth.
9. Pre-turn: the replacement of alloy saw,pre-turn for one minute
before the use ,in order to let the saw table into the work status.
10.Before cutting, must confirm whether the use of alloy saw blade
is in keeping with the cutting material.
11. Cutting material, it must normal operation of the saw blade
intercept material, prohibited pushing hard.
12. Prohibit the reverse turn,reverse leads to drop saw teeth, be
13.During using, hear unusual voices and see the abnormal shaking,
the section is not flat, immediately stop operations and look for
unusual reasons.And replace saw .
14.At Cutting, the prohibition of the saw blade to stop suddenly in
the middle of cutting. Stop in the middle of cutting,will lead the
sawtooth shedding, saw deformation.
15. Pls promptly apply proof-rust oil after cutting.Prevent from
16.When the sawtooth is not sharp,pls grind sawtooth again,must go
to the manufacturers specify or professional grinding shop.
Otherwise it will destroy the original sawtooth angle,impact
accuracy cutting and shorten the life of saw blade use.
Overview of woodworking tct band saw blade for wood:
1. TNT/FedEx/DHL/UPS for samples or under 45KG wegight goods , Door
2. By Air or by Sea for batch goods,from airport(seaport) to
3. Customers specifying freight forwarders or not.
4. Production Time: 3- 7days for samples; 2-3.5 weeks for batch